Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protected.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:300 / 500 V
Conductor:Soft annealed solid copper wire as per class 1 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, Laid Direct in the ground, where mechanical damages are expected to occur. They are normally used in connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed Stranded Copper wire as per class 2 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Bedding:Polyvinylchoride rated 70ºC
Armoring:Double layers of steel tapes are applied helically
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums.
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protected.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed solid copper wire as per class 1 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, laid direct in the ground, where mechanical damages are expected to occur. They are normally used in connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed stranded copper wire as per class 2 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Bedding:Polyvinylchoride rated 70oC
Armoring:Single layers of steel wire are applied helically
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums.
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, laid direct in the ground, where mechanical damages are expected to occur. They are normally used in connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed stranded copper wire as per class 2 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Bedding:Polyvinylchoride rated 70oC
Screen :Copper tape helically applied over the bedding
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drum.
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protected.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:300 / 500 V
Conductor:Soft annealed solid copper wire as per class 1 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, Laid Direct in the ground, where mechanical damages are expected to occur. They are normally used in connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed Stranded Copper wire as per class 2 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Bedding:Polyvinylchoride rated 70ºC
Armoring:Double layers of steel tapes are applied helically
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums.
Control Cables - 0.6/1 (1.2) KV
Applications :
For outdoor and indoor installations in damp and wet locations, connecting signaling and control units in industry, in railways, in traffic signals, in thermopower and hydropower stations. They are laid in air, in ducts, in trenches, in steel support brackets or direct in ground, when well protected.
Engineering Specifications :
Standard:IEC – 60502
Rated Voltage:600 / 1000 V
Conductor:Soft annealed solid copper wire as per class 1 of IEC 228
Insulation:Polyvinylchloride rated 70oC or 85oC
Assembly:Cores twisted together to form a round assembly cable with fillers whenever necessary
Color code:Black cores with white numbers and one green yellow core
Sheath:Flame retardant polyvinylchloride, black or grey color
Minimum bending radius:15 x d (d= overall diameter)
Temperature rating:+5oC up to + 50oC during operation
Packing:On non-returnable wooden drums